Archive

Archive for the ‘Cables & Adapters’ Category

Jul
07

MSI Radeon X1600 256MB GDDR3 PCI-Express (PCI-E) Video Card, Dual DVI, S-Video/TV Out, OEM/Bare Card

Need a budget video card that has Dual DVI? look no further!

Lets face it, dual monitors are the rage. The best way to get dual monitor support on your PC is with a dedicated video card with Dual DVI-I. Video Cards with dual dvi can be adapted to use either: 2 monitors with VGA connectors via DVI->VGA Adapters, 2 DVI Monitors or a combination of DVI and VGA monitors. The DVI Connection is the best connection possible for your PC monitor and will give you a clear, sharp picture that will get the very best out of your LCD monitor.




So why use pick this video card? Flat out you will *not* find a better deal on a PCI Express video card with dual DVI connectors. Sure, this is not the fastest video card in the world. It is a Radeon X1600 PCI-Express video card with 256MB of dedicated DDR3 memory. Its class of card was a preferred mid-range video card in 2006 going for $150 or more. The card will provide you with more than adequate performance for the average user and will typically provide better performance than onboard video. Its dedicated 256MB of memory is enough to power pretty much any display you can throw at it up to a massive 2560×1600 Resolution. If you are buying a system with onboard video, and a free PCI-E slot, theres no reason not to buy this card today unless you are primarily doing 3D gaming. For 3D gaming consider a higher performing card 48XX series video card. If youre only doing light gaming or arnt a gamer buy this one and save big!

Features: Support for Microsoft DirectX 9.0 programmable vertex and pixel shaders in hardware. Shader Model 3.0 vertex and pixel sgader support. 2x/4x/6x Anti-Aliasing modes, 2x/4x/8x/16x Anisotropic Filtering modes. Optimized for performance at high display resolutions, including widescreen HDTV resolutions. Avivo Video and Display Engine. CrossFire Support.

Specifications: Memory capacity: 256MB. Memory interface: 128-bit. Memory Clock Speed: 700MHz. Engine Clock Speed: 600MHz. Pixel Shader Processor: 12. Connectors: (1) 7-pin S-Video/Composite port. (2) 24-pin DVI-I ports. 2D Display Modes: Resolutions, colors and maximum refresh rates(Hz) in 256, 65K or 16.7M colors.

System Requirements: Operating Systems Support Windows XP/2000/Vista. Power supply of 350 (and up) watt is highly recommended for system stability.

Driver Download: This is a bare card and does not come with a driver CD. We recommend using the Radeon Catalyst 9.2 driver set with this card for the best performance under Windows XP or Vista. For linux PCs, we believe most distributions should support for this video card in kernel assuming you have the latest kernel. If not, the links below go to the 9.3 Catalyst driver suite for Linux.

  • Windows XP / 2000 (32-bit)
  • Windows XP 64-Bit
  • Windows Vista 32-bit
  • Windows Vista 64-bit
  • Linux 32-Bit
  • Linux 64-Bit

    References: | MSI Company Website

    Limited Warranty: 90-Day Warranty. 30-Day money back from receiving date with 15% restocking fee for non-defective returns. No credit or refund after 30 days. Customer is responsible for returning defective products including DOA due to manufacturer unless testing is paid before shipping.
  • Jul
    07

    The A-301 piezo Driver/Piezo Amplifier is a high Voltage, high speed Bi-polar Piezo Driver / Linear Amplifier for applications where low cost amplifier is needed..

    It was designed as a Linear Amplifier / Driver for PIEZO Electric Actuators (also known as “Piezo Amplifier”), stacks,piezo sheets, bimorph elements and other devices. It may be also used as a general purpose High Voltage amplifier for Medical applications (for example, as electode driver for Neurology).

    The Piezo Driver / Piezo Amplifier is based on a high voltage, MOSFET amplifier which is capable of driving up to ±175V (350V ptp).
    The current capacity of the A-301 is 60 mA (100 mA peak)
    The current capacity of the A-301 HS is 100mA (150mA peak).

    The A-301 bandwidth is 30 KHz. while the A-301 HS can go up to 200 KHz.
    The slew rate of the A-301 is 30V/uSec. compared to 250V/uSec for the A-301HS.

    By connecting 2 amplifiers in series, the output voltage may be doubled to 700Vptp .

    The amplifier section is very stable and has a low noise output and a very low electrical noise - Compare Our Specifications!

    A-301
    Competitive Price!  


    Features:



    1 Low cost alternative for small experiments.

    1 Very Low Electrical Noise.

    1 Low Distortion

    1 High Slew rate-up to 400 Volt/microsecond.

    1 Input protection-High Voltage, On/Off.

    1 Output protection – Short-circuit, Power loss,Impedance.

    Specifications

    A-301 Piezo Amplifier  

     

     

     

     

     

     

    Amplifier section:
    Maximum Input Voltage
    ± 10 V
    Maximum Output Voltage
    ± 175 V (350Vptp)
    Maximum Current
    ± 60 mA for A-301, +/-100mA for A-301HS
    Bandwidth

    Into 1 K2 resistive load
    A-301:DC – 30 kHz, A-301HS-DC-200KHz
    Output Power
    16 Watt maximum
    DC Gain
    20
    Coupling
    Input & Output: Direct DC Coupling
    DC Offset
    Adjustable to ± 8 Volts + On/Off Switch
    Input Impedance
    10 K2
    Slew Rate
    A-301: 30V/ µSec, A-301HS:250V/µSec
    Output Noise
    4 mV PTP max. (0.8 mV RMS max.)
    (input shorted, 30 KHz. BW)
    Variable Gain Option: 0-10X or 0 – 20X or 0-40X available.
    Please consult the factory regarding that option.
    Dimensions: H= 90mm W=134mm L=235mm
    AC Input
    Line Input Voltage
    110/120 V, 60 Hz and 220/230 V , 50 Hz
    (Switchable by user)
    Line Input Current 0.5 A peak

    Applications:
    2 amplifiers can be connected in series or in parallel in order to double the Output Voltage or Output Current.
    Series connection (+/- 350V into a floating load = 700V ptp).
     
    Series Connection 
    Please note that both amplifiers must be floating (i.e. be careful not to ground them via an oscilloscope etc.)
    It is also possible to double or tripple the output voltage by using a special transformer. Using a transformer is possible only at
    high frequency (over 10 KHz.) and it requires more components to be added for balancing and proper termination of the load.

    Parallel connection is done by adding resistors at the input and at the output. Please consult the factory for parallel connection.
     

    Calulating the estimated current needed to drive your load: 

     

    In order to purchase the right amplifier to drive your load, you must calulate the peak current needed.
     
    For Capacitive load:
     
       Ipeak(A) = 2 π F C Vpeak (for a Sine Wave) 
    Ipeak(A) = 4 F C Vpeak (for a triangular wave) 

    Ipeak(A) = C dV / dt (for a square wave or sharp rise time) 

     
    F=Maximum frequency (Hz.)
    π=3.1415927
    C=Capacitance in Farads
    Vpeak=Maximum Voltage you need to drive your Load.
     
    For Resistive Load:
      I = Vpeak/R
    where R is the resistance of your load in Ohms.

    The current, Voltage and Frequency must be less or equal to the amplifiers specifications. 

    This amplifier is NOT SUITABLE for driving pure inductive loads
    (i.e. speakers, solenoides, electromagnets etc.) 
    You must connect your load with thick wires to minimize inductance (like speaker wires). Coaxial cable is not recommended for cables over 2m (6.5 Ft.) because the capacitance of the cable (15-50 pF/Ft) will load your amplifier at high frequencies. 

    Example:
    The active impedance of a capacitive load is given by the equation:
    Z=1/(2*Pi*F*C) where Pi=3.1415, C in Farads, F in Hz.The user must check that under the peak operation Voltage, at maximum frequency, the current will not exceed 200mA (0.2A).
    Example:
    Operating Voltage is +/-150V, Maximum Frequency=10KHz. Load is 10nF.
    Z=1/(2*3.1415*10,000*10EE-9) =1592 Ohms.
    150[V]/1592[Ohm] =94[mA] ===>The amplifier will drive that load at an amplitude of 150V (300V ptp).

    Fast shipping!!!
    All amplifiers are available from stock. We ship within 1 working day after your credit card was approved. Shipping is by UPS. It takes up to 3 working days to ship by UPS to any country. 

    We accept VISA, MaterCard, American Express. Your credit card is charged only after we ship the order. 
    For more information about our Amplifiers and Signal Conditioner products , please click here.

    Jul
    07
    Detailed Uninterrupted Power Supply (UPS – ) Description

    Features:
    a) Microprocessor control
    b) Elegant LCD status display
    c) Automatic voltage regulation
    d) Emergency power backup protects valuable data and computer hardware
    e) Short circuit and overload protection
    f) Over charge and over discharge protection
    g) Smart audible and LCD icon alarms
    h) Surge, spike and lightning protection
    i) Fax / modem / telephone protection port
    j) User replaceable batteries
    k) Intelligent UPS power management software
    l) Global voltage customization: 220V, 240V, 230V, 110V, 115V, 120V
    
    Customizable option (Contact us for specifications and )
    
    
    Specifications:
    a) Input: AC 165 - 275V
    b) Output: AC 220V+ / -10%
    c) Frequency: 50 / 60Hz
    d) Transfer time: 6ms
    e) Battery: 1 x 12V, 7Ah battery
    f) Charge time: ≤8 hours
    g) Operating temperature: -5 ~ 40o
    h) Operating humidity: 10 - 90% RH, non condensing
    i) Power: 300VA, 650VA, 500VA, 800VA, 1000VA, 1200VA
    
    Our Uninterrupted Power Supply (UPS - ) comply with International Quality Standards and their quality and durability are fully guranteed.
    Contact information:

     

     

    Address: Suicheng Industrial Zone, Zhongshan, Dongfeng, Guangdong, China
    Company Name: SunLogic Electrical Appliance Limited
    Contact Person: Mr. Jason Feng
    Fax: 86-760-2638788
    Telephone: 86-760-2638988, 2636888
    Website: http://www.vmarkpower.com
    Zip: 528425
    Source// global-b2b-network.com

    Jul
    07







    Detailed LG628C, LG1028C UPS Description
    Specifications and features:
    a) 500VA – 1200VA, AC input: 220VAC±20%; 50Hz±5%
    b) UPS output: 220VAC; 50Hz
    c) Online interactive design with high efficiency and high reliability
    d) Automatic voltage rectify and stable voltage output
    e) All – day online alternating current surge protection
    f) Intellectualized CPU control of low battery, discharging
    protection, recharging, and surveillance
    g) Wave filtering and noise isolation
    h) Cold start, auto shut off against zero load
    i) RS – 232 communication interface

    LG1028C:
    Color box
    Dimensions: 480 x 225 x 295cm
    N. W.: 6kg
    G. W.: 8.5kg
    G. W.: 9.8kg

    Inner packing
    LG628C:
    Color box
    Dimensions: 410 x 180 x 225cm
    N. W.: 6.8kg

    Outer packing
    LG628C:
    Qty / carton: 4pcs
    Carton dimensions: 435 x 390 x 480cm

    LG1028C:
    Qty / carton: 2pcs
    Carton dimensions: 510 x 480 x 320cm

    We have been a leading manufacturer and exporter of LG628C, LG1028C UPS


    Contact information:





















    Address: 3 / F, West Area, 8 Third Road, Xialang Knitting Industrial Zone, Zhangcha Town, Foxi Road, Foshan City, Guangdong Province. China
    Company Name: Sunshine and Cell Power System Equipment Co., Ltd. Foshan
    Contact Person: James
    Fax: 86-757-82305809
    Telephone: 86-757-82305805
    Website: http://www.sunshineups.com
    Zip: 528000

    Jul
    07








    Detailed UPS With Digital LCD UPS – 500D Description
    Primary Technical Parameter
    Rated voltage: AC 220V
    Rated frequency: 50Hz / 60HzAInput range: AC 165V~275V
    Output voltage: AC 220V~10%
    Transfer time: 4ms
    Battery type: 12V / 7AH / 1PC ()
    Back – up time: Over 15 minutes if use for one PC with a 17monitor ();
    Charge time: ≤8 hours
    Operating temperature: -5℃~40℃
    Operating humidity: 10 – 90% RH, non condensing. Weight():6.
    Audio noise: < 40dBA
    Lighting protection: IEEE~587A
    Measurement():85x330x150
    Packing Size():420x150x250
    N.8
    LCD display
    CPU control
    AVR function
    Auto detect frequency
    Large loading capacity & compatibility
    Intelligent UPS management software
    Cold start function
    Wide input voltage range
    Overload and output short circuit protection
    Over discharge function
    Build – in power purify cimuit restrain distortion of lightning,
    pulse and miscellaneous waves etc.
    Buzzer alarm and sound silence function
    FAX / MODEM / TEL protection port

    We are committed to doing our best for you, and welcome inquiries for UPS With Digital LCD UPS – 500D.


    Contact information:





















    Address: Room 8B,2# Block A, Haidian District, Golden Resource Business Center, Beijing. China
    Company Name: Prostar International Electric Co., Ltd.
    Contact Person: Ms. Nadia
    Fax: 86-10-88861976
    Telephone: 86-10-88861977,88861975
    Website: http://www.prostarele.com
    Zip: 100089


    Source// global-b2b-network.com